Categories
Uncategorized

Lifetime Flip Tables — Polyethylene Plastic Review

Why do companies produce blow-molded tables?

Traditional flip tables were made with convenience in storing in mind. The idea that a person or business who set of a banquet style sitting arrangement in moments, and take it down just as quickly, appealed to many people. The one solution that was not considered, or was not really possible, was convenience in moving the tables and chairs. Traditional flip tables were made out of heavy wood, or pressboard, and had a heavy iron (sometimes steel) frame work شیلنگ کولر. This provided for a very stable unit but would way at well over a hundred and fifty lbs .. Needless to say, these types of tables just weren’t and are quite difficult to move around. What the was parched for was a light-weight banquet-style option.

Blow-molding is the process of taking naff and by using it to a predesigned mold. One of the benefits of this process is the easy flexibility in design. When a company uses this process, they can take on virtually any shape or design specification desired. Thus, blow-molding gives a plus in engineering over the traditional pressboard or wood top tables. Another selling point of the blow-molding process is the light-weight nature of plastic when compared to wood. A typical blowmolded table could way as much as 35% less when compared to a wood capped table. With this design, you now have the convience of storage as well as convenience in movement. Finally, the blow-molding process is cheaper overall. Tables developed with this process are typically sold for 30% the cost of a comparable sized wood capped flip table.

What is polyethylene plastic?

Polyethylene plastic a man made material created by polymerization of the ethylene molecule. The benefits of this plastic over traditional parts is its resistance to break. Polyethylene is the plastic used in milk carton, which absorbs impact very well. Do not, however, confuse this plastic with the inherent wimpiness of milk carton designs as the flip tables that make use of this plastic typically have over 100 times the thickness of milk cartons; the purpose of the milk carton comparison is to point out the ability to absorb impact. To help expand illustrate this point, a common test that manufacturers use to point out polyethylene’s strength is the barricade demonstration. In some cities in the united states use plastic barricades filled with water to mark off areas in construction specific zones. The demonstration ensures that these traditional naff will break when dropped from a certain height, spilling the water out everywhere. But, the polyethylene plastic barricade, when dropped from the same height, will just touch down with a thud but no break.

The production process employed by Lifetime Products in producing their tables also makes their polyethylene UV resistant. In comparison, traditional parts are known to diminish and crack over time. This happens because of the chemical makeup of these older parts and is virtually inevitable when the plastic is come across sunlight for extended intervals. Polyethylene plastic will not diminish, crack, or peel from the lemon like these other parts.

Leave a Reply

Your email address will not be published.